J10M

Joue 10 minutes.

Electric Circuits

Turn the wires, close the loop and light the bulbs: series, parallel and short circuits, in twenty-four levels.

Ages 10 and up

A battery, a copper wire, a light bulb. Nothing happens until the wire goes all the way around: the current leaves one terminal of the battery, passes through the bulb and comes back through the other terminal. Cut the wire in just one place, and everything goes dark. That is the first thing this game puts in front of your eyes, and it is the most important.

The tiles sit on a grid. You do not draw anything or connect anything by hand: you tap a tile and it turns a quarter turn. Two neighboring tiles are connected when their connectors face each other. Your job is to find the closed path that leaves the + terminal, goes through everything it needs to, and comes back to the − terminal. When the current flows, little glowing beads start racing along the copper, the filament heats up, and the workshop lights up.

The game follows what you learn about electricity in middle school science, without a single formula. No volts, no amps, no Ohm's law: just lights you compare. A single bulb shines at full brightness; two bulbs on the same loop shine at half; three shine dimly. Two separate branches each get the full current. And a wire that joins the two terminals without powering anything blows the fuse in a shower of sparks. If you are looking for a simple, hands-on way to see the difference between series and parallel circuits, this is it.

How to play

  1. Look at the grid. The battery is bolted down and does not move: find its + terminal and its − terminal. The bulbs are off, and the wires point every which way.
  2. Tap a wire to turn it. Each tap turns it a quarter turn clockwise. Four taps and it is back where it started.
  3. Watch what changes. A wire connected to a battery terminal glows a pale gold: it is live, but nothing flows through it yet. As soon as the loop closes, the whole circuit lights up brightly and little beads of current start racing from one terminal to the other. The pale copper is your best clue: it shows how far the wire connected to the battery reaches, and so where your loop is broken.
  4. Close the loop. When every bulb is shining, the level is won and your stars appear.

Bolted tiles, marked with four bolts in the corners, do not turn: they are part of the level's frame. A switch does not turn either, but it opens and closes with a single tap.

On a keyboard, the arrow keys move the cursor from square to square, Enter turns the tile under the cursor and the space bar flips a switch. The cursor outline stays visible at all times, and after each move a screen reader announcement gives the number of bulbs lit and how bright they are.

The tiles

  • The battery. Two terminals, one on each side: the + carries a cross, the − a dash. The current leaves the +, goes around the circuit and comes back through the −. It is bolted down in every level.
  • The straight wire. It connects two opposite sides. One tap switches it from vertical to horizontal.
  • The corner wire. It connects two neighboring sides: it is what turns the circuit around a corner.
  • The T wire. Three sides connected. It is used to start a branch, or to bring it back.
  • The crossed wire. Two wires pass over each other without touching: the vertical one and the horizontal one stay two separate paths. It lets a loop cross itself without a short circuit.
  • The bulb. Two terminals with a filament between them. It lights up when it belongs to a closed loop connected to both terminals of the battery. Under it, a label says what it really gets: full, half or third, with a small gauge. It is written out, not just suggested by color.
  • The burnt-out bulb. Its glass is blackened and its filament is broken. Current no longer passes through it, ever. In series, it puts out the whole loop; in parallel, it only cuts off its own branch.
  • The switch. A small lever between two contacts. Closed, the current flows; open, the branch is cut. Tap it to flip it.
  • The motor. It appears in the last world. It draws current like a bulb, but it only turns at full power: share it with a bulb on the same branch, and its blades stay still.

Unscrewing a bulb

This is the experiment teachers do in class, and here it is a move in the game: press and hold a bulb, or press the space bar, or use the Unscrew button, and it comes out of its socket. The current no longer has a path through it.

  • In series, unscrewing one bulb puts out all the others at once: they were on the same loop.
  • In parallel, the others do not even flicker: each branch has its own path.

Two levels make this their goal: light everything, then unscrew one bulb and watch. That is where the difference jumps out at a single glance.

Four worlds, twenty-four levels

The first circuit

Six levels for the basic rule: current only flows in a closed loop. The first one is won in two taps and thirty seconds, without reading anything. The next ones stretch the loop, add corners, then a crossed wire where the loop crosses itself: you have to see that the two wires of the crossing have nothing to do with each other.

At the end of this world, the sandbox unlocks.

In series

Six levels where everything goes through the same wire. Two bulbs on a single loop: they both light up, but they shine less brightly, and their label says "half." Three bulbs: "third." That is exactly what you need to see and understand, and that is why each bulb's share is written under the glass.

Then come the switches. In series, an open switch cuts everything: lift a single lever and both bulbs go dark together. One level slips a burnt-out bulb into the middle of the path: you cannot repair it, so you have to send the current the other way and leave it aside. The last one asks you to light everything, then unscrew a bulb: the loop opens, and the workshop goes dark at once.

In parallel

Six levels with branches. The circuit leaves the battery, splits into two or three paths, then joins up again. Each branch gets everything: a bulb alone on its branch shines at full brightness, even while other bulbs shine next to it. Each switch now only controls its own branch, and a burnt-out bulb no longer cuts off the others. That is the whole difference with series, and it is why the lights in a house are wired this way.

One level makes a branch out of bare wire, with nothing in it: the two terminals end up joined by plain copper. The fuse blows, the battery swells, sparks fly and a little smoke rises. It is a failure, it is funny, and you can try again right away: open that branch and the circuit comes back to life.

The next-to-last level is the comparison, and it may be the most useful one in the game: the same battery powers four bulbs, two mounted one after the other, and two each on their own branch. All four light up at the same time, and the labels settle it: "half," "half," "full," "full." The last level brings back unscrewing, in parallel this time: the others stay lit.

The big workshop

Six levels for those who have finished everything else. The grids grow to six columns, the rails are bolted down so they do not turn, and the goal is no longer just "light everything":

  • two bulbs at full brightness, which rules out putting them one after the other;
  • only one of three bulbs lit, while two of them share the same branch;
  • light everything while a branch of bare wire is just waiting for a mistake to blow the fuse;
  • and the motor, which only turns at full power and so needs a branch of its own.

The par is tight there: the game has worked out the smallest number of moves for each level, and three stars mean not making a single extra one.

Stars and progress

Each level counts your moves: a rotation, a flip of a switch or an unscrewing is one move. The level shows its par, the smallest number of moves that does the job. It is calculated, not estimated, and checked for each of the twenty-four levels.

  • Three stars: you finished in a number of moves equal to par, or fewer.
  • Two stars: up to three moves over par.
  • One star: as soon as every bulb is shining.

A single star is enough to open the next level: nobody gets stuck. But three stars ask you to think before you tap, because a corner or T wire turned one quarter turn too far costs three moves to bring back. The Start over button puts the level back as it was and resets the counter to zero: it is the right reflex as soon as you are lost.

Your progress and your stars stay in your browser, with no account to create: you play again whenever you like, and your stars wait for you. Once the page has loaded, everything is worked out right in your browser. Your best solutions also count toward the leaderboard, explained just below.

Leaderboard

Every level you clear earns points, and your leaderboard score is the total of all your levels. Later worlds are worth more: in the first world, three stars earn 50 points, two earn 40 and one earns 30; the second world pays double, the third triple and the big workshop four times as much. Clearing all twenty-four levels at par adds up to 3,000 points.

Each level counts once, for your best solution. Replaying a level for more stars raises your total; replaying it worse costs you nothing. Moves are counted just as on screen, since your last Start over; past 150 moves the level does not count, so start it over and the counter goes back to zero. The leaderboard only keeps verified solutions: the server replays every move you made, quarter turn by quarter turn, before it accepts the score. The first time you clear a level, the game asks for a nickname, and from then on your total is sent on its own without interrupting your game. The sandbox does not count: it has no goal.

The sandbox

Once the first world is done, a sandbox opens: an empty grid, a palette of tiles, and no goal at all. Pick a tile in the palette, tap a square, and it is placed. Tap a placed tile to turn it, tap a switch to flip it, and use the eraser to clear a square.

The palette holds every tile in the game, the battery and the motor included, except the burnt-out bulb. That is where you experiment for real: put four bulbs in series to see how far the light drops, and the labels then read "quarter"; put four in parallel to see that they all keep shining at full brightness; unscrew one in the middle to watch what happens to the others; or build a short circuit on purpose just for the sparks. Whatever you build is saved: you will find it again on your next visit.

Tips

  • See where the pale copper stops. A wire connected to a terminal is live and glows faintly. Follow it from the battery: the spot where it stops is where your loop is broken.
  • The beads of current never lie. They only move where current really flows, and their speed shows its strength: slow means several bulbs are sharing it. At a junction, watch them closely: one bead arrives, two leave. The current splits between the branches, then the two flows join up again on the other side. In the shared trunk, they race twice as fast as in each branch.
  • Read the labels. "Half" under two bulbs means they are on the same loop. "Full" under each means each one has its own branch.
  • Start from the battery. Leave a terminal, move from tile to tile, and ask yourself each time where the current can go next. Most levels solve themselves in that order.
  • Count your quarter turns. A corner or T wire you turn one notch too far costs you three more moves; a straight wire, one. Look at the orientation you need before you tap.
  • A dim bulb is a clue. It tells you other bulbs are sharing its loop. If you wanted parallel, your branches are not really branches.
  • A short circuit is fixed with a single quarter turn. Find the loop that joins the two terminals without passing through any bulb, and open it anywhere.
  • Bolted tiles are fixed points. They show you the frame of the circuit you are after: the path has to go through them.
  • Starting over costs nothing. The counter goes back to zero, which is often faster than undoing ten rotations. You can also open the level map and replay a level you have already cleared to refresh the rule, then come back.

If you like learning by doing, try Logic Gates and Code the Robot, or browse every educational game on the site.

Frequently asked questions

What age is the electric circuits game for? The first world can be played from age eight or nine, with no knowledge of electricity: it is a pipe puzzle. The series and parallel worlds match what students learn in middle school science, and the sandbox interests everyone, adults included.

Do I need to know Ohm's law? No, and the game does not use it. It shows no voltage, no current in amps and no resistance. It shows shares that you compare: full, half, third, off. That is how circuits are introduced in school before any calculation.

Why do two bulbs in series shine less brightly? Because they share the same current, one after the other. Each one gets roughly half of what a single bulb would get; with three, a third. The game writes it under each bulb and shows it through the speed of the beads of current.

Does the game get hard? Yes, toward the end. The fourth world, "the big workshop," unlocks after the first three: wider grids, bolted tiles that constrain the layout, a motor to get turning, and goals that are no longer just about lighting everything, such as only one bulb out of three, or all of them at full brightness. Three stars there demand the exact number of moves.

What exactly is a short circuit? It is a path of wire that joins the two terminals of the battery without going through any device, here without passing through a bulb. Nothing slows the current down, the battery drains at once and the fuse blows. In the game, it is a spectacular failure; in a house, it is what the circuit breaker is there to stop.

Can a burnt-out bulb be repaired? No, it stays burnt out for the whole level: that is the point. What you need to learn is how to send the current another way, and to notice that in parallel, a burnt-out bulb does not bother anyone else.

Can I play entirely with a keyboard? Yes. The arrow keys move the cursor around the grid, Enter turns the tile, the space bar flips a switch or unscrews a bulb, and Escape closes panels. Every square is announced with what it is, which sides it connects and its share of light, and an announcement area gives the result after each move.

What should I do if I am stuck on a level? Start it over: the counter goes back to zero, and you can rebuild the circuit from the battery, tile by tile. Since a single star unlocks the next level, a hard level never blocks your progress.

Is there a leaderboard? Yes: it ranks players by the total points of the levels they have cleared, up to 3,000. The twenty-four levels are the same for everyone, and you play them at your own pace.

More educational games

Educational games
  • Tangram
    Seven pieces, one shadow to fill: thirteen shapes and an album to complete.
  • Logic Gates
    Place the right gates, flip the switches and make the lamp follow the whole truth table.
  • Telling Time
    Set both hands to the time you're given, from o'clock times to the exact minute, PM times included.
  • Algebra Balance
    Take away, add, divide — but always on both sides. The scale stays level until x stands alone.
  • Making Change
    The customer pays too much: put the right coins in their hand, and as few as you can.
  • Prime Factor Tree
    Split every number down to its primes, which light up like lanterns. Eight trees against the clock, solo or in a race.
  • Mental Math
    Twenty sums that get harder and harder: answer right, and as fast as you can.
  • Europe Chase
    A thief runs from city to city. Read the clues, follow the trail and name them.